Outdoor lightings also serve beautifying purposes as much as they assist in improving your home’s surety network. Sadly, changing weather conditions tend to create an opposed setting for the wire sockets and plugs.
From rain to melting snow, these varied climatic conditions can cause a short circuit, leading to nonrecoverable injury or electrocutes.
So, how do you keep outdoor switch sockets dry? Apart from installing plugs that come with a cover of what ilight offers, here are some of the proven methods you can try out.
Take a look.
Table of Contents
Applying an Electrical Tape
One of the easiest ways to guard your outdoor joints against damage is to cover the space with electrical tape.
Just inject the plug into a Ground Fault Circuit Interrupter (GFCI) guarded outlet or your general outdoor outlet. Next, carefully cover the plug rounded with Teflon tape; make sure it’s nicely sealed and guarded. Finally, try repeating the method several times to form a watertight seal.
And if your outlet has multiple receptacles, replicate the process for individual receptacles and plugs. Don’t neglect any outlet or opening uncovered.
Applying Plastic Bag or Plastic Wrap
If you don’t have Teflon tape or don’t want to apply it for any purpose, you can use a plastic bag to achieve the same goal.
Whether you’re wrapping a plastic bag or any other sort of plastic wrap, yet you require tape to seal the ends. However, you can use quality duct tape or zip ties too. Just ensure the cover is secure and completely sticks to keep out the moisture. And make sure if you have multiple receptacles, all are securely wrapped.
Install Waterproof Plugs and Sockets
It is best to use sockets and plugs that are explicitly designed for outdoor exercise with any outdoor joint. Refrain installing sockets or plugs that are meant for indoor use.
Having a waterproof plug or socket is good, but it’s better to have both waterproof. This is the first condition before even contemplating an additional shield such as a cover.
Install Covers under a Roof
You can directly locate the sockets for plugs that require to be attached to wall sockets under a roof.
Ideally, this should be a place where rain cannot directly approach, such as your screened-in terrace or balcony.
Moreover, you can place a cover over the receptacle to protect it from dampness. Such covers normally have a trap door, so you won’t be having any problem using them.
However, the joint should only be left for a few days.
If you have gone through the whole article, then I’m sure you must have understood how to keep the outdoor switch sockets dry. However, to be on the safer side, we recommend you to find more information on using plugs and cords that are designated for outdoor use.
